關于臭氧老化箱材質,性能,原理解析
瀏覽次數:1765更新日期:2015-06-28
臭氧老化箱可用于橡膠類制品如硫化橡膠,熱塑性橡膠,電纜絕緣護套等產品,在靜態拉伸或連續的動態拉伸變形下,或在間斷的動態拉伸與靜態拉伸交替的變形下,暴露于密閉無光照的含有恒定臭氧濃度的空氣和恒溫的試驗箱中,按預定時間對試樣進行檢測,從試樣表面發生的龜裂或其它性能的變化程度,以評定橡膠的耐臭氧老化性能.適用于學校,工廠,軍工,研位,等單位.
工作原理:臭氧在大氣中的含量很少卻是橡膠龜裂的主要因素,臭氧老化箱模擬和強化大氣中的臭氧條件,研究臭氧對橡膠的作用規律,快速鑒定和評價橡膠抗臭氧老化性能與抗臭氧劑防護效能的方法,進而采取有效的防老化措施,以提高橡膠制品的使用壽命.
臭氧老化箱材質:
1.外殼均采用A3鋼板數控機床加工成型,外殼表面進行防靜電噴塑處理,更顯光潔、美觀;
2.內膽采用SUS304鏡面不銹鋼板;
3.保溫材質選用高密度玻璃纖維棉,保溫厚度為100mm;
4.攪拌系統采用長軸風扇電機,耐高低溫之不銹鋼多翼式葉輪,以達強度對流垂直擴散循環;
1.空氣循環裝置:內置循環風道,試驗氣流均勻地從上往下平行于流過試件表面,符合國標.
2.采用電腦型臭氧濃度﹑溫濕度控制器,集成度高,可靠性能好, LED顯示,顯示分辨率溫度(0.1℃)、濕度(0.1℃)、臭氧濃度(10pphm),PID設定值控制,操作方便.
3.電磁式空氣泵提供空氣氣源,無油干燥,保證氣路系統長期工作的可靠性.
4. 雙光速紫外臭氧檢測儀為上海大學與我司技術合作開發的符合*標準檢測臭氧的儀器,性能穩定,自動調零控制,無臭氧冷光源紫外燈壽命長,精度高.第三代比爾-朗伯數字化系統測量軟件,準確可靠.
5. 24小時在線連續檢測,數據隨時可查.
6.符合標準的不銹鋼試驗倉及無聲放電制造臭氧的全封閉氣體回路,整個臭氧氣體的發生和捕捉均是密閉的回路,確保人身安全.